Ir a contenido

Fábrica reacondicionada

Makita (HR4013-R) 1-9/16" AVT Rotary Hammer (Factory Reconditioned)

SKU HR4013-R
Ahorre $159.01 Ahorre $159.01
Precio original $759.00
Precio original $759.00 - Precio original $759.00
Precio original $759.00
Precio actual $599.99
$599.99 - $599.99
Precio actual $599.99
Garantía de 30 días en todas las herramientas reacondicionadas de fábrica
en stock
  • Factory Reconditioned

  • Air actuated counterbalance actively reduces vibration

  • Vibration absorbing housing moves independently of the motor and drive mechanism

  • Integrated damper spring at the base of the impact bolt is engineered to absorb impact vibrations

  • Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control

  • INCLUDES : Side handle, D-handle, depth rod, grease and case

The 1-9/16” AVT® Rotary Hammer (model HR4013C) has 45% less vibration and 20% more impact energy than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT®), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT® is a category-leading vibration rating of 5m/s². The powerful 11 AMP motor delivers 8.4 ft. lbs. (11.4 Joules) of impact energy, 20% more than the previous model for faster drilling. An added feature is the option of lock-on or trigger-activated in the “chipping only” mode, with a push button start/stop control for more convenient operation. The HR4013C is engineered for a range of concrete applications including drilling/coring through-holes for pipes, setting larger anchors, securing tilt-wall supports, small chipping applications, and more. It is ideal for a range of trades including masons, concrete contractors, demolition contractors, plumbers, electricians, sprinkler installers, and general contractors seeking a best-in-class rotary hammer.

CA Prop 65 Warnings

  • Powerful 11 AMP motor delivers 8.4 ft.lbs. / 11.4 J. of impact energy to handle the most demanding applications
  • Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
  • Advanced AVT® includes an air actuated counterbalance that directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the hammer mechanism to effectively reduce vibration
  • Advanced AVT® includes a vibration absorbing housing with a spring loaded back handle and housing which moves independently of the motor and hammer mechanism effectively isolating more vibration away from the user
  • Advanced AVT® includes an integrated damper spring at the base of the impact bolt engineered to absorb impact vibrations from the drill bit
  • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
  • Soft start suppresses start-up reaction for more precision and better accuracy
  • "Soft no-load" function automatically reduces the speed of the motor when idling to help increase tool life and performance
  • Variable speed control dial enables user to match the speed to the application for greater versatility
  • Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
  • Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
  • L.E.D. power light indicates switch failure or cord damage
  • L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
  • Automatic brush cut-off protects commutator from damage for longer tool life
  • 2-mode operation for "Chipping Only" or "Hammering with Rotation"
  • Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
  • 24 bit angle settings allow the bit to be set at different positions for operating convenience
  • One-touch sliding chuck for quick bit changes
  • Includes a 16.4 ft. power cord for user convenience

AMPS : 11
Max. Capacity (concrete drilling) : 1-9/16"
Optimum Range (concrete drilling) : 5/8" - 1-1/4"
Max. Capacity (concrete drilling w/ core bit) : 4-1/8"
Impact Energy (ft.lbs.) : 8.4
Impact Energy (Joules) : 11.4 J
Blows Per Minute (variable speed) : 1,450 - 2,900 BPM
No Load Speed (variable speed) : 250 - 500 RPM
Vibration Control : Yes
Vibration (m/s²) : 5
Overall Length : 18-11/16"
Cord Length (ft) : 15.6'
Net Weight : 15.1 lbs.
Bit Type : Accepts SDS-MAX
Power Type : Corded
Bind-Up Control : No
Shipping Weight : 27.8 lbs.
Model# HR4013-R

Makita (5007F) 7‑1/4" Circular Saw (Factory Reconditioned) - Pacific Power Tools

¿Qué es el reacondicionado de fábrica?

Cada herramienta reacondicionada de fábrica, devuelta por los clientes con un uso mínimo, se somete a rigurosas pruebas y restauración para lograr una condición operativa como nueva.

En Pacific Power Tools, cada herramienta reacondicionada es restaurada profesionalmente y certificada por el fabricante original para garantizar la misma funcionalidad y durabilidad que una contraparte nueva.

Explore nuestra colección con precios competitivos, descuentos exclusivos y gemas ocultas en nuestras ofertas reacondicionadas.

Obtenga más información sobre las herramientas reacondicionadas en fábrica

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar