Sin cable

Makita-built brushless motor delivers up to 447 MPH and 39 CFM 4 digitally controlled speeds with 5 nozzles for a wide range of applications ...

18V LXT® Lithium-Ion 5.0Ah battery reaches a full charge in 45 minutes or less Integrated L.E.D. battery charge level indicator allows user to ...

Makita-built brushless motor delivers 4,800 RPM for faster cutting performance Large 2-3/4" x 12-1/4" cutting capacity at 90° L.E.D. light ca...

Up to 40% faster cutting speed Makita-built brushless motor delivers 5,200 RPM for faster cutting performance Up to 290 cuts per charge in 2X...

Makita-built motor delivers 1,100 lbs. of dispensing force 5 speed dial optimizes flow rate from 0 - 66 IPM (inches per minute) Drip-reductio...

Makita-built motor delivers 1,100 lbs. of dispensing force 5 speed dial optimizes flow rate from 0 - 66 IPM Rubberized soft grip handle provi...

Makita-built brushless motor and 40V max XGT® battery delivers up to 23% faster drilling in concrete Drills up to 38% more holes per charge A...

Three speed settings (7,000/9,500/11,000 O.P.M.) with one-touch electronic speed control Ergonomically designed body and grip for increased ope...

PERFORMANCE : Up to 75 cuts per charge in 6x12 lumber on a single charge of a 5.0Ah battery CAPACITY : Cuts 6x material at 90° and 4x materia...

Fastens 3/8" crown staples from 3/8" to 7/8" in length; also drives Arrow® T50 type staples Spring-loaded driving mechanism allows for a more c...

Weighs only 14.6 lbs. with battery (battery not included) for easy portability 3-stage L.E.D. gauge on the tool indicates battery charge levels...

Makita-built motor delivers 26,000 RPM for faster grinding  Slide switch with lock-on and vent slots to direct exhaust air away from the user ...

Rack-and-pinion vertical fence system engineered for accurate fence adjustments Cast aluminum pivot fence, positive stops at 0°, 45° and 90°, a...

Cuts up to 14 ga. mild steel, 16 ga. stainless steel and easily cuts through spiral duct seams BL™ Brushless motor is designed to run cooler an...

Variable speed control dial rotates pad 6,000-10,000 OPM for smooth finish sanding 5-speed power selection enables operator to match speed to a...

Powerful Makita-built brushless motor delivers 20,000 RPM for faster cutting Designed for one handed operation Easy forward and reverse opera...

Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control Designed for reduced wind noise level for ...

Selectable cross reference lines plus 4-point required for level, align, plumb & square applications Makita 12V max CXT® 4.0Ah rechargeable...

Three adjustable light heads rotate 180° vertically 3-mode operation; delivers 3,000 lumens on High, 1,700 lumens on Medium, and 900 lumens on ...

Equipped with Bluetooth® 5.1 to wirelessly connect mobile devices up to 100' Up to 10 speakers can be wirelessly connected Delivers 3X sound ...

Variable speed control dial (10,000-20,000 OPM) enables user to match the speed to the application Anti-Vibration Technology (AVT®) for up to 8...

Makita-built brushless motor delivers power of a 22.7cc gas hedge trimmer Up to 16% more torque than gas for cutting thick branches Up to 6 h...

3 orbital settings plus straight cutting deliver faster and more accurate cuts Variable 6-speed control dial (800-3,500 SPM) enables user to ma...

1/2" Hammer Driver-Drill (0-500 & 0-2,000 RPM) with BL™ Motor delivers 530 in.lbs. of Max Torque Variable speed Impact Driver (0-3,400 RPM ...

Three speed settings (4,000/8,000/12,000 OPM) engineered for faster material removal Ergonomically designed body and grip for increased operato...

High temperature at 1,022°F Max air flow of 7.1 CFM Up to 21 minutes of continuous run time with 18V LXT® 6.0Ah Battery BL1860B (battery not ...

3/8" keyless chuck for fast and easy bit installation and removal Makita-built 4-pole motor delivers 120 in.lbs. of Max Torque Variable speed...

Diseño ultracompacto y ergonómico de sólo 5-5/8" y pesa sólo 2,7 libras (batería no incluida) Ideal para trabajar en espacios reducid...

El motor sin escobillas BL™ ofrece hasta 4400 SPM para un corte más rápido La hoja de corte de doble cara de doble acción de 30" prop...

Alimentación con cable de 13 amperios El motor sin escobillas construido por Makita junto con la batería XGT® de 40 V máx. se combin...

Diseño compacto y ergonómico de solo 5-7/8" de largo Diseñado con un diseño de jampot metálico para mayor durabilidad. Transmi...

El motor de velocidad variable construido por Makita ofrece 0-2600 golpes por minuto para un corte rápido y eficiente Pesa sólo 6,4 l...

Dual handle design with ergonomic soft grip for excellent control and comfort Speed control with 2-speed gearing (0-500 RPM and 0-920RPM) combi...

Powerful Brushless Motor delivers 102 CFM using 40V XGT® battery (battery not included) Compact and portable design; weighs only 11 lbs. Over...

Makita-built motor delivers 465 ft.lbs. of Nut-Busting Torque and 260 ft.lbs. of Fastening Torque 3 forward and 3 reverse Auto-Stop modes for i...

3 x 360° laser planes provide reference positions for level, align, plumb and square applications Sharp laser line with +/-1/16” at 33’ for bes...

FACTORY RECONDITIONED Makita-built 4-pole motor delivers 121 in.lbs. of Max Torque 3/8" keyed metal chuck for improved bit gripping power Wei...

LOCAL PICKUP RECOMMENDED (SHIPPING SUBJECT TO FREIGHT SURCHARGE) Makita-built brushless motor delivers 3,600 RPM for faster cutting performance ...

AWS® utilizes Bluetooth® for wireless power-on/off communication between tool and dust extractor Over 2X more suction power with 148 CFM and 92...

Up to 20% faster cutting speed* Constant Speed Control provides continuous speed during heavy cutting applications Cuts up to 180 FT per char...

BL™ Brushless Motor delivers 520 ft.lbs. of Fastening Torque and 740 ft.lbs. of Nut-Busting Torque 3 forward and 3 reverse Auto-Stop modes for ...

Miters 0-47° left and 0-57° right; bevels 0-45° left and 0-5° right Automatic Speed Change™ adjusts cutting speed and torque during cut for opt...

Makita-built brushless motor with two speed, variable speed (0-400 RPM and 0-1,500 RPM) Compact and lightweight design enables increased maneuv...