Ir a contenido
Factory Reconditioned Cordless Landscaping Framing Concrete Stone Woodworking All products
Makita (XCU04CM-R) 36V (18V X2) LXT® Brushless 16" Chain Saw Kit (4.0Ah) (Factory Reconditioned)

Fábrica reacondicionada

Makita (XCU04CM-R) 36V (18V X2) LXT® Brushless 16" Chain Saw Kit (4.0Ah) (Factory Reconditioned)

Makita

Ahorre $119.01 Ahorre $119.01
$439.00
-
$439.00
$319.99
-
$319.99
Garantía de 30 días en todas las herramientas reacondicionadas de fábrica
en stock

FACTORY RECONDITIONED

  • Makita-built outer rotor brushless motor direct-drive system delivers power of a 32cc gas chain saw

  • "Tool-less" chain adjustment for convenient operation and maintenance

  • Variable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performance

  • Adjustable automatic chain lubrication with large oil reservoir

  • INCLUDES : (2) 18V LXT® 4.0Ah batteries, dual port charger

Interested in Bulk? Request a Quote Here

Landscapers and contractors are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 36V (18V X2) LXT® Brushless 16” Chain Saw (XCU04CM). With zero emissions, lower noise, and considerably less maintenance, the XCU04CM is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® 4.0Ah Batteries for maximum power, speed and run-time. And with the efficient Makita® outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a 32cc gas chain saw. The XCU04CM has a 16” guide bar and the Makita-built outer rotor brushless motor direct drive system motor with variable speed delivers 0-3,940 FPM for increased cutting speed. It has zero emissions and reduced maintenance: there's no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there's no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion Batteries, and the saw is ready to use. Convenience features include a tool-less chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

CA Prop 65 Warnings

  • No gas, emissions, oil mixing or pull starts with reduced maintenance and low noise levels
  • Makita-built outer rotor brushless motor direct-drive system delivers power of a 32cc gas chain saw
  • Two 18V LXT® Lithium-Ion batteries deliver power and performance without leaving the 18V LXT® platform
  • Up to 150 cuts in 4 x 4 cedar with two 18V LXT® 4.0Ah batteries
  • "Tool-less" chain adjustment for convenient operation and maintenance
  • Variable speed trigger and high chain speed (0-3,940 FPM) for improved cutting performance
  • Adjustable automatic chain lubrication with large oil reservoir
  • Large oil filling port with view window allows operator to easily add and check bar oil level
  • Built-in L.E.D. on/off switch with auto power-off function; automatically shuts the saw off when operation is delayed for extended battery life
  • Rubberized soft grip top handle is engineered for the user to more easily apply even cutting pressure
  • Features Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
  • Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
  • 3-year limited warranty on tool, battery and charger
  • Only use genuine Makita batteries and chargers

Power Equivalency (cc Gas) : 32
Product Type (CS, PS) : Rear Handle, Tool-less
Guide Bar Length : 16"
Pitch : 3/8" LP
Gauge : .043"
Chain Speed : 3,940 FPM
Battery : 2X 18V LXT® Lithium-Ion
Net Weight (with battery) : 11.1 lbs.
Handle Type (Chainsaws) : Rear Handle
Power Type : Cordless
Dimensions (LxWxH) : 31-1/2" x 8-1/2" x 9-1/4"
Packaged Depth (in) : 10.63"
Packaged Height (in) : 10.59"
Packaged Width (in) : 22.24"
Shipping Weight : 17.81 lbs.
UPC Code : 088381-754545

Makita (5007F) 7‑1/4" Circular Saw (Factory Reconditioned) - Pacific Power Tools

¿Qué es el reacondicionado de fábrica?

Cada herramienta reacondicionada de fábrica, devuelta por los clientes con un uso mínimo, se somete a rigurosas pruebas y restauración para lograr una condición operativa como nueva.

En Pacific Power Tools, cada herramienta reacondicionada es restaurada profesionalmente y certificada por el fabricante original para garantizar la misma funcionalidad y durabilidad que una contraparte nueva.

Explore nuestra colección con precios competitivos, descuentos exclusivos y gemas ocultas en nuestras ofertas reacondicionadas.

Obtenga más información sobre las herramientas reacondicionadas en fábrica

Visit Our Store

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar