Ir a contenido
Factory Reconditioned Cordless Landscaping Framing Concrete Stone Woodworking All products
Makita (XEC01PT1-R) 36V (18V X2) LXT® Brushless 9" Power Cutter Kit, cut-off wheel, lock-off (Bare Tool) (Factory Reconditioned)

Fábrica reacondicionada

Makita (XEC01PT1-R) 36V (18V X2) LXT® Brushless 9" Power Cutter Kit, cut-off wheel, lock-off (Bare Tool) (Factory Reconditioned)

Makita

Ahorre $300.00 Ahorre $300.00
$1,099.00
-
$1,099.00
$799.00
-
$799.00
Garantía de 30 días en todas las herramientas reacondicionadas de fábrica
Stock bajo
  • Powerful cutting solution for a variety of applications with a max cutting depth of 3-1/2"
  • Eliminates the hassles of gas with lower weight, reduced maintenance, and zero emissions allowing use in indoor environments
  • Brushless motor powered by two 18V LXT® batteries eliminate the hassle of engine pull starts (batteries not included)
  • Integrated water delivery system with water flow adjustment knob continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
  • Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
Interested in Bulk? Request a Quote Here

The 36V (18V X2) LXT® Brushless 9” Power Cutter, Tool Only (XEC01Z) has the power to cut through various materials with all the benefits and convenience of cordless operation. The XEC01Z has a maximum cutting depth of 3-1/2”, thus can cut through standard residential concrete slab in a single pass. Besides concrete, it has the power to cut through I-beams, steel pipe (3”), rebar (3/4” -#6), metal stud (14” wide) and more. The benefits of a cordless power cutter over a gas power cutter include no oil/gas mixing, no emissions, no pull starts, no engine maintenance, and lighter weight. This means reduced operator fatigue, instant starts, cost savings, and the ability to use the power cutter indoors, in tight spaces, and high elevations.

CA Prop 65 Warnings

  • Eliminates the hassles of gas with lower weight, reduced maintenance, and zero emissions allowing use in indoor environments
  • Brushless motor powered by two 18V LXT® Lithium-Ion batteries eliminate the hassle of engine pull starts allowing immediate starts-up (batteries not included)
  • Brushless motor eliminates carbon brushes, enabling the motor to run cooler and more efficiently for longer life; delivers 6,600 RPM
  • Integrated water delivery system with water flow adjustment knob continuously feeds water for OSHA Table 1 Compliance in concrete cutting applications
  • Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the wheel is suddenly forced to stop
  • Electric brake stops the wheel in 4 seconds or less allowing for faster re-positioning
  • Built-in L.E.D. light with an independent on/off switch illuminates the cutting area for increased visibility
  • Makes single pass cuts up to a 3-1/2" depth in various masonry and metal materials
  • Integrated overload indicator alerts of excessive battery power draw during heavy loads (batteries not included)
  • Overload protection is designed to protect the motor from burnout in abnormally high torque situations
  • Soft start suppresses start-up reaction for smoother start-ups and longer gear life
  • Protective battery compartment helps prevent dust and slurry contamination
  • Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
  • Rubberized front handle can be held in multiple positions for increased comfort at various cutting orientations
  • Belt-drive design provides smoother operation with lower vibration
  • Lock-off power switch requires two actions to start power
  • Large spindle lock button for easier wheel changes while wearing gloves
  • Lower noise at 114 dB(A) and smoother operation for continuous use over longer periods
  • Weighs only 13.7 lbs. with batteries for reduced operator fatigue (battery not included)
  • Integrated battery charge light indicator allows user to monitor battery charge level for each of the two batteries (batteries not included)
  • 3-year limited warranty
  • Only use genuine Makita batteries and chargers

Battery : 2X 18V LXT® Lithium-Ion
No Load Speed : 6,600 RPM
Wheel Diameter : 9"
Max. Cutting Depth : 3-1/2"
Arbor Size : 7/8"
Lock-On Switch : No
Lock-Off Switch : Yes
Switch Type : Rear trigger switch
Electric Brake : Yes
Bind-Up Control : Yes
Overall Length : 21-3/4"
Net Weight (with battery) : 13.7 lbs.
Power Type : Cordless
Form Factor (LXT) : X2
Motor Type : Brushless
Shipping Weight : 17.42 lbs.
UPC Code : 088381-899390

Makita (5007F) 7‑1/4" Circular Saw (Factory Reconditioned) - Pacific Power Tools

¿Qué es el reacondicionado de fábrica?

Cada herramienta reacondicionada de fábrica, devuelta por los clientes con un uso mínimo, se somete a rigurosas pruebas y restauración para lograr una condición operativa como nueva.

En Pacific Power Tools, cada herramienta reacondicionada es restaurada profesionalmente y certificada por el fabricante original para garantizar la misma funcionalidad y durabilidad que una contraparte nueva.

Explore nuestra colección con precios competitivos, descuentos exclusivos y gemas ocultas en nuestras ofertas reacondicionadas.

Obtenga más información sobre las herramientas reacondicionadas en fábrica

Visit Our Store

Comparar productos

{"one"=>"Seleccione 2 o 3 artículos para comparar", "other"=>"{{ count }} de 3 artículos seleccionados"}

Seleccione el primer artículo para comparar

Seleccione el segundo artículo para comparar

Seleccione el tercer elemento para comparar

Comparar