All Trades

Soft brushes help prevent dust from escaping and help move the tool over the surface 4-spring suspension system keeps shroud flush with surface...

Soft brushes help prevent dust from escaping and help move the tool over the surface) 4-spring suspension system keeps shroud flush with surfac...

Los componentes de magnesio crean una sierra con menos peso (13,2 libras) que es resistente en el lugar de trabajo. El motor de 15 am...

Used for breaking concrete off or away from main sections For use with spline or 3/4" hex - 21/32" round shank hammers Machined and forged fr...

For digging in clay, shale, hard packed gravel, loose concrete and dirt For use with Spline or 3/4" hex - 21/32" shank hammers Clear-coat hel...

Variable speed dial (0 - 3,200 RPM) enables user to match the speed to the application Soft start for smooth start-ups and less fling off of po...

El interruptor selector de 2 modos permite al operador seleccionar opciones de contacto o de clavado secuencial Sólido cargador de ...

Wide chisel with two cutting angles for chipping dried concrete For use with Makita HK1810 Power Scraper Clear-coat to help prevent corrosion...

Wide chisel with two cutting angles for chipping dried concrete For use with Makita HK1810 Power Scraper Clear-coat to help prevent corrosion...

Innovative design keeps the point sharp longer than traditional bits) Improved geometry for faster penetration and more efficient material removal...

XGT® High Power Battery Delivers up to 35% More Power than BL4040 Battery charge level with 4 bright green L.E.D. indicators to clearly see cha...

For general purpose demolition in brick or concrete For use with Makita spline shank tools Forged from iron for added strength Great for st...

Specially designed for faster and smoother planing Made of high-speed steel Ideal for planing of wood For use with Makita 3-1/4" planer mod...

Designed for faster, smoother cuts and long life Double edged blade design Long lasting tungsten-carbide construction For use with Makita 3...

Three speed settings (High/Medium/Low) and Oscillation selector for optimal air velocity and control Designed for reduced wind noise level for ...

Extends to an overall height of 7-1/4 ft. with a foldable design for quick setup and takedown 3-mode operation; delivers 3,000 lumens on High, ...

Three adjustable light heads rotate 180° vertically 3-mode operation; delivers 3,000 lumens on High, 1,700 lumens on Medium, and 900 lumens on ...

Bar light folds in half & rotates 270° for maximum positioning 3 different light combinations and 3 power selections up to 1,700 lumens T...

Up to 45% more cuts per charge compared to standard blades Up to 55% faster cutting compared to standard blades High grade Tungsten carbide t...

El motor sin escobillas construido por Makita ofrece 1,950 in.lbs. del par máximo Modos controlados digitalmente; dos modos T, un mod...

Makita-built brushless motor delivers 1,860 in.lbs. of Max Torque Digitally controlled mode; T-mode, for faster tightening of self-drilling scr...

Delivers the power of a 15 AMP corded Reciprocating Saw Makita-built brushless motor delivers up to 40% faster cutting speed AVT® is an inter...

El motor sin escobillas construido por Makita ofrece 6000 RPM para un rendimiento de corte más rápido La base, el protector y la cub...

Makita-built brushless motor delivers 3,500 RPM for faster cutting performance Large 3-13/16" cutting capacity at 90° Dual L.E.D. lights illu...

Potencia de un cable de 15 amperios* Hasta 375 cortes por carga en madera SPF 2X4 La profundidad de corte de 2-9/16" permite u...

Up to 2X faster cutting than corded unit Makita-built brushless motor delivers 4,000 RPM for faster cutting than corded Extra large 3-3/4" cu...

Makita-built motor delivers 465 ft.lbs. of Nut-Busting Torque and 260 ft.lbs. of Fastening Torque 3 forward and 3 reverse Auto-Stop modes for i...

Compact and lightweight design (30.6 lbs.) for job site portability Large precision machined aluminum base supports material for more efficient...

El dial rápido convenientemente ubicado (0 - 6800 OPM) permite al operador adaptar la velocidad a la aplicación Doble acción: "Órbita...