Skip to content
Factory Reconditioned Cordless Landscaping Framing Concrete Stone Woodworking All products
Makita (XWT15Z) 18V LXT® Brushless 4 - Speed 1/2" Sq. Drive Impact Wrench w/ Detent Anvil (Tool Only) - Pacific Power Tools

Factory Reconditioned

Makita (XWT15Z-R) 18V LXT® Brushless 4-Speed 1/2" Sq. Drive Impact Wrench w/ Detent Anvil (Tool Only) (Factory Reconditioned)

Makita

Sold out
$249.00
-
$249.00
$199.99
-
$199.99
1-Year Limited Warranty
Out of stock
  • Compact Power delivers 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
  • Makita-built brushless motor delivers 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
  • Compact and ergonomic design at only 5-5/8" long
  • 4-speed power selection (0-1,000 / 0-1,800 / 0-2,600 / 0-3,200 RPM & 0-1,800 / 0-2,600 / 0-3,400 / 0-4,000 IPM)
  • 3 forward and 3 reverse Auto-Stop modes for increased efficiency
Interested in Bulk? Request a Quote Here

Makita’s 18V LXT® Brushless 4-Speed 1/2" Sq. Drive Impact Wrench w/ Detent Anvil, Tool Only (XWT15Z) provides improved fastening control, ideal for automotive, installation, and fabrication trades. The impact wrench combines extended run time and speed control for unmatched fastening performance. It is powered by a Makita-built brushless motor for longer run time. The brushless motor delivers 240 ft.lbs. of Max Torque and 430 ft.lbs. of Nut-Busting Torque. Precise fastening control is achieved through the 4-speed power selection switch, which accounts for a wide range of applications. Three forward and three reverse rotation auto-stop modes offer increased efficiency when fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. The XWT15Z features Makita's Extreme Protection Technology (XPT™), a protective seal inside the tool. It is designed to improve a tool’s operation in harsh conditions by channeling water and dust from key internal components.

CA Prop 65 Warnings

  • Makita-built brushless motor delivers 240 ft.lbs. of Fastening Torque and 430 ft.lbs. of Nut-Busting Torque
  • Compact and ergonomic design at only 5-5/8" long
  • 4-speed power selection switch (0-1,000 / 0-1,800 / 0-2,600 / 0-3,200 RPM & 0-1,800 / 0-2,600 / 0-3,400 / 0-4,000 IPM) for precise fastening control in a wide range of applications
  • 3 forward and 3 reverse Auto-Stop modes for increased efficiency
  • Full speed mode function reduces trigger pull to reach full speed
  • Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
  • The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Extreme Protection Technology (XPT™) is engineered to provide improved dust and water resistance for operation in harsh conditions
  • Built-in L.E.D. light with an independent on/off switch illuminates the work area
  • Weighs only 4.0 lbs. with battery for reduced operator fatigue (battery not included)
  • Rubberized soft grip provides increased comfort on the job
  • Makita's proprietary hammer and anvil impact mechanism are manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power
  • Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating
  • Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting on the charger
  • Compatible with Makita 18V Lithium-Ion batteries with a Star symbol
  • 3-year limited warranty
  • Only use genuine Makita batteries and chargers

Square Drive : 1/2"
No Load Speed (var. 4 spd.) : 0 - 1,000 / 0 - 1,800 / 0 - 2,600 / 0 - 3,200 RPM
Impacts Per Minute (var. 4 spd.) : 0 - 1,800 / 0 - 2,600 / 0 - 3,400 / 0 - 4,000 IPM
Nut-Busting Torque (ft.lbs./N•m) : 430 ft.lbs./580 N•m
Fastening Torque (ft.lbs./N•m) : 240 ft.lbs./330 N•m
Voltage : 18V
Battery : 18V LXT® Lithium-Ion
Overall Length : 5-5/8"
Dimensions (LxWxH) : 5-5/8" x 3-3/16" x 9-11/16"
Form Factor (LXT) : 18V LXT®
Motor Type : Brushless
Shipping Weight : 3.24 lbs.
UPC Code : 088381-898096

Makita (5007F) 7‑1/4" Circular Saw (Factory Reconditioned) - Pacific Power Tools

What is Factory Reconditioned?

Each Factory Reconditioned tool, returned by customers with minimal use, undergoes rigorous testing and restoration for a like-new operating condition.

At Pacific Power Tools, every Reconditioned Tool is professionally restored and certified by the original manufacturer to ensure the same functionality and durability as a new counterpart.

Explore our collection with competitive pricing, exclusive discounts, and hidden gems in our Reconditioned Deals.

Learn More about Factory Reconditioned Tools

Visit Our Store

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare