Limited Time Pricing

Powerful variable 3-speed motor produces a maximum air velocity of 219 MPH Weighs only 4.1 lbs. with battery (battery not included) for reduced...

1/2" Hammer Driver-Drill (0-500 & 0-2,000 RPM); brushless motor delivers 530 in.lbs. of Max Torque Variable speed Impact Driver (0-3,400 RP...

Factory Reconditioned Makita-built motor delivers 0-2,800 strokes per minute and a 1-1/4" length stroke for faster cutting "Tool-less" blade ...

Makita-built brushless motor delivers 1,500 in.lbs. of Max Torque Variable speed (0-3,400 RPM & 0-3,600 IPM) for a wide range of fastening ...

Factory Reconditioned 1/2" Hammer Driver-Drill (0-500 & 0-2,000 RPM); brushless motor delivers 530 in.lbs. of Max Torque Variable speed I...

Factory Reconditioned Magnesium components create a saw with less weight (13.2 lbs.) that’s job site tough 15 AMP motor delivers enough power...

Factory Reconditioned 15 AMP motor delivers 6,600 RPM Rubberized soft grip handle provides increased operator comfort Labyrinth constructio...

Powerful Makita built electronically controlled motor delivers 3,700 RPM Precision machined aluminum base provides smooth, accurate cutting and...

Factory Reconditioned Makita-built 2-speed brushless motor delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute "Tool-less" blade c...

Factory Reconditioned Makita-built Brushless motor delivers 8,500 RPM Automatic Speed Change™ technology adjusts speed and torque during oper...

Factory Reconditioned 10 AMP motor for demanding applications 2-mode operation: “Hammering with Rotation” and “Hammering Only” Rubberized e...

BL™ Motor delivers 5,000 RPM for faster cutting and ripping Automatic Speed Change™ technology adjusts speed and torque during operation for op...

Drives 2,325 screws with Push Drive™ Technology using 18V LXT® 5.0Ah Battery Brushless motor delivers 0-4,000 RPM to handle a variety of drywal...

Factory Reconditioned 6 AMP motor delivers 11,000 RPM Small 2-1/4" diameter barrel grip for maximum comfort Labyrinth construction, zig-zag...

Factory Reconditioned BL™ Brushless Motor delivers 740 ft.lbs. of Fastening Torque and 1,180 ft.lbs. of Nut-Busting Torque 3-speed (0-900/0-1...

Factory Reconditioned 6.5 AMP motor delivers more output power for increased stock removal and superior finishes Planes 3-1/4” wide and 3/32”...

Factory Reconditioned Large carbide inserts on nose piece for long lasting performance Built-in magnet ensures last nail is driven Easy, on...

Factory Reconditioned Powerful 6.0 AMP motor delivers 11,000 RPM for the most demanding applications Compact design with small 2-1/4" diamete...

Factory Reconditioned HAMMER DRILL : Brushless 1/2" Hammer Driver-Drill (0-550 & 0-2,100 RPM) delivers 1,250 in.lbs. of Max Torque Effici...

Factory Reconditioned 7.0 AMP motor delivers 0 - 1,100 RPM and 0 - 4,500 BPM for demanding applications 3-mode operation for:“Rotation Only” ...

Makita built BL™ Brushless Motor delivers 1,250 in.lbs. of Max Torque Compact and ergonomic design at only 7" long; 14% shorter than previous m...

Interchangeable 3/8" and 1/4" anvils for added versatility Variable speed (0-800 RPM) for a wide range of fastening applications Powerful mot...

Makita-built BL™ Brushless Motor delivers up to 459 CFM and 116 MPH Cruise control lever with variable speed trigger for power and run time man...

Factory Reconditioned Cast iron cylinder with greater bore and stroke for maximum performance Runs at a lower RPM (1,730) resulting in greate...

Factory Reconditioned 6.5 CFM @ 90PSI; Powerful enough to run two framing nailers Cast iron cylinder with greater bore and stroke for maxim...

Narrow nose design allows easy nailing access in confined areas "Tool-less" easy to clear nose for fast and easy nail extraction Easy to use ...

  Powerful 12 AMP motor for continuous operation; 0 - 3,000 SPM Well-balanced design (only 7.3 lbs. and 17-5/8" long) for reduced operator fati...

Factory Reconditioned Quiet Series design at only 60 dB Complete roll-cage construction design Cord wrap for convenient AC power cord stora...

Factory Reconditioned Powerful 12 AMP motor for continuous operation; 0 - 3,000 SPM Well balanced design (only 7.3 lbs. and 17-5/8" long) for...

Factory Reconditioned 14 AMP motor delivers 950 - 1,900 BPM and 25.5 J/ 18.8 ft.lbs. of impact energy Variable speed control dial to match th...

Factory Reconditioned Variable speed control dial (4,000-12,000 OPM) to match the sanding speed to the material Large two-finger trigger swit...

Factory Reconditioned Powerful 11 AMP motor turns 4" wide belt (1,640 ft./min.) for fast material removal Labyrinth construction seals motor ...

HAMMER DRILL : Variable 2-speed 1/2" Hammer Driver-Drill (0-550& 0-1,800 RPM); 970 in.lbs. of Max Torque IMPACT DRIVER : 3-speed (0-1100/0-...

Makita-built motor delivers 1,900 SPM Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge Die holder rotates 360° to meet dem...

Designed to cut openings in installed board with an adjustable blade depth up to 1-3/16" Short 1/4" stroke with adjustable blade helps prevent ...

Powerful Brushless motor delivers 57 CFM using a 18V LXT® Lithium-Ion battery (battery not included) Compact and portable design; weighs only 1...

Direct drive Makita-built brushless motor positioned at the sanding head for increased efficiency Round brush design delivers high efficiency d...

Factory Reconditioned 2-mode selector switch allows operator to select contact or sequential nailing options Solid top-loading aluminum magaz...

Factory Reconditioned 1-1/4 Maximum HP motor for improved performance Smooth rack-and-pinion fine depth adjustment system Ergonomic design ...

Factory Reconditioned Powerful 15 AMP motor delivers 5,800 RPM for proven performance and jobsite durability Two built-in LED lights illumina...

Factory Reconditioned Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration 8 AMP motor delivers 2....

Factory Reconditioned Cuts up to 6-5/8" crown (nested), 5-1/4" base (vertical), and crosscuts a 4x12 at 90° Unique 2-Steel Rail Sliding Syste...

Factory Reconditioned Powerful 3.0 AMP with soft start feature for smooth start-ups and fast cutting and sanding "Tool-less" clamp system f...

Factory Reconditioned Low noise, low AMP draw in high output Runs at a lower RPM (1,730) resulting in greater motor and pump life Low AMP...

Dual front and rear bevel supports provide additional rigidity for precise and accurate bevel cuts Variable speed control dial (2,500 - 6,300 R...

HAMMER DRILL : Brushless 1/2" Hammer Driver-Drill (0-550 & 0-2,100 RPM) delivers 1,250 in.lbs. of Max Torque Efficient brushless motor opti...

Powerful motor delivers up to 10,000 PSI of Max pressure Features two speed modes; Low and Auto-Speed for better control Auto-Speed mode appl...