Factory Reconditioned New Arrivals

FACTORY RECONDITIONED Brushless Motor delivers 5,100 RPM for maximum performance and 50% longer run time per charge Delivers up to 558 cross-cu...

FACTORY RECONDITIONED BL™ Brushless Motor delivers 740 ft.lbs. of Fastening Torque and 1,180 ft.lbs. of Nut-Busting Torque 3-speed (0-900/0-1,0...

FACTORY RECONDITIONED 10 AMP motor for demanding applications 2-mode operation: “Hammering with Rotation” and “Hammering Only” Rubberized erg...

FACTORY RECONDITIONED Makita-built motor delivers 0-2,800 strokes per minute and a 1-1/4" length stroke for faster cutting "Tool-less" blade ch...

FACTORY RECONDITIONED Magnesium components create a saw with less weight (13.2 lbs.) that’s job site tough 15 AMP motor delivers enough power t...

FACTORY RECONDITIONED 6.5 AMP motor delivers more output power for increased stock removal and superior finishes Planes 3-1/4” wide and 3/32” d...

FACTORY RECONDITIONED Makita-built 2-speed brushless motor delivers 0-2,300 (Low) & 0-3,000 (High) strokes per minute "Tool-less" blade cha...

FACTORY RECONDITIONED Sub-Compact; ideal for working in tight spaces and overhead applications Brushless motor delivers 0-4,800 BPM and .88 ft....

FACTORY RECONDITIONED Makita-built BL™ Brushless Motor delivers up to 459 CFM and 116 MPH Cruise control lever with variable speed trigger for ...

FACTORY RECONDITIONED BL™ Motor delivers 5,000 RPM for faster cutting and ripping Automatic Speed Change™ technology adjusts speed and torque d...

FACTORY RECONDITIONED  Makita-built brushless motor delivers 1,500 in.lbs. of Max Torque Variable speed (0-3,400 RPM & 0-3,600 IPM) for a w...

FACTORY RECONDITIONED 7.5 AMP motor delivers 11,000 RPM Slide switch for operator convenience; weighs only 4.5 lbs. Labyrinth construction, z...

FACTORY RECONDITIONED BL™ Brushless Motor delivers 3,900 RPM for faster cutting Automatic Speed Change™ adjusts cutting speed and torque during...

FACTORY RECONDITIONED 0 - 3,000 SPM combined with a 1/2" stroke for faster cutting Dual-position on/off switch allows for either paddle or trig...

FACTORY RECONDITIONED Interchangeable 3/8" and 1/4" anvils for added versatility Variable speed (0-800 RPM) for a wide range of fastening appli...

FACTORY RECONDITIONED Makita-built variable speed motor delivers 0-1,200 RPM and 0-4,000 BPM 3-mode operation for “rotation only”, “hammering w...

FACTORY RECONDITIONED Makita built BL™ Brushless Motor delivers 1,250 in.lbs. of Max Torque Compact and ergonomic design at only 7" long; 14% s...

FACTORY RECONDITIONED BL™ Brushless Motor delivers 530 in.lbs. of Max Torque Variable 2-speed (0-500 & 0-2,000 RPM) (0-7,500 & 0-30,000...

FACTORY RECONDITIONED Uses compact and ergonomic blade-right design at only 10-5/8" long and 6.4 lbs. with 2.0Ah battery Delivers up to 174 cro...

FACTORY RECONDITIONED Powerful Makita built electronically controlled motor delivers 3,700 RPM Precision machined aluminum base provides smo...

FACTORY RECONDITIONED Makita-built motor delivers 325 ft.lbs. of Fastening Torque with 2,200 IPM at 1,600 RPM Rocker switch for forward/reverse...

FACTORY RECONDITIONED BL™ Brushless Motor delivers 780 ft.lbs. of Fastening Torque and 1,250 ft.lbs. of Nut-Busting Torque 3-speed power select...

FACTORY RECONDITIONED Variable speed control dial (4,000-12,000 OPM) to match the sanding speed to the material Large two-finger trigger switch...

FACTORY RECONDITIONED 6.6 AMP motor with less weight (5.6 lbs.) 2-mode operation for “Rotation Only” or “Hammering with Rotation” 2-speed,...

FACTORY RECONDITIONED 1/2" Hammer Driver-Drill (0-500 & 0-2,000 RPM); brushless motor delivers 530 in.lbs. of Max Torque Variable speed ...

FACTORY RECONDITIONED 14 AMP motor delivers 950 - 1,900 BPM and 25.5 J/ 18.8 ft.lbs. of impact energy Variable speed control dial to match the ...

FACTORY RECONDITIONED Makita-built brushless motor delivers 1,950 in. lbs. of Max Torque Digitally controlled modes; two T-modes, one assist mo...

FACTORY RECONDITIONED 15 AMP motor delivers 6,600 RPM Rubberized soft grip handle provides increased operator comfort Labyrinth construction,...

FACTORY RECONDITIONED 2.0 AMP motor rotates pad 14,000 OPM for smooth finish sanding Engineered to operate at a low noise level with reduced vi...

FACTORY RECONDITIONED Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration 8 AMP motor delivers 2.1 ft...

FACTORY RECONDITIONED Solidly built with an aluminum body, magazine, and cylinder Tool-less easy to clear nose for fast and easy staple extract...

FACTORY RECONDITIONED Cuts 4x material in a single pass 14 AMP motor delivers enough power to cut beams and timber Precision gearing with bal...

FACTORY RECONDITIONED Air actuated counterbalance actively reduces vibration Vibration absorbing housing moves independently of the motor and d...

FACTORY RECONDITIONED Powerful 12 AMP motor for continuous operation; 0 - 3,000 SPM Well balanced design (only 7.3 lbs. and 17-5/8" long) for r...

FACTORY RECONDITIONED 6.5 AMP Motor and 3 orbital settings plus straight cutting “Tool-less” blade change system for fast blade installation an...

FACTORY RECONDITIONED Makita-built Brushless motor delivers 8,500 RPM Automatic Speed Change™ technology adjusts speed and torque during ope...

FACTORY RECONDITIONED Makita-built BL™ Brushless Motor delivers up to 473 CFM and 120 MPH Cruise control lever with variable speed trigger for ...

FACTORY RECONDITIONED Powerful 3.0 AMP with soft start feature for smooth start-ups and fast cutting and sanding "Tool-less" clamp system for f...

FACTORY RECONDITIONED Quick-Shift Mode™ uses the motor’s electronic controls to find the best balance of speed and torque  BL™ Brushless Motor ...

FACTORY RECONDITIONED 6 AMP motor delivers 11,000 RPM Small 2-1/4" diameter barrel grip for maximum comfort Labyrinth construction, zig-zag v...

FACTORY RECONDITIONED 13 AMP motor delivers 2,800 - 10,500 RPM SJS™ technology is a mechanical clutch system that helps prevent motor and gear ...

FACTORY RECONDITIONED "Tool-less" clamp system for fast accessory installation 18V LXT® Lithium-Ion battery provides up to 20 minutes of contin...

FACTORY RECONDITIONED Variable speed control dial (10,000 - 30,000 RPM) to match the speed to the application Smooth rack-and-pinion fine depth...

FACTORY RECONDITIONED HAMMER DRILL : Brushless 1/2" Hammer Driver-Drill (0-550 & 0-2,100 RPM) delivers 1,250 in.lbs. of Max Torque Effi...

FACTORY RECONDITIONED BL™ Brushless motor delivers up to 120 MPH air velocity and 473 CFM of air volume Two 18V LXT® Lithium-Ion batteries deli...

FACTORY RECONDITIONED Compact and ergonomic design at 5-7/8" long; weighs only 2.9 lbs. Compact and ergonomic design at 5-1/4" long weighs only...

FACTORY RECONDITIONED Three speed settings (7,000/9,500/11,000 O.P.M.) with one-touch electronic speed control Ergonomically designed body and ...